2023 Kubota M6060 HDC 4WD

This is Getting Noticed! 3 people viewed in last 7 days

Call for Price

Call for Price

Key Features

New/Used New
Usage0 Hours
Availability In Stock
LocationAmigo Power Equipment
Primary ColorOrange
Stock # KU0070222
VIN KBUMFBDCCP8H70222
Condition Excellent

Product Features

Description

Introducing the M60 Series. These top-of the-line M Series tractors have been redesigned and re-equipped with advanced features including Common Rail System (CRS) with Exhaust Gas Recirculation system (EGR) and Diesel Particulate Filter (DPF) Muffler for powerful yet clean and economical performance, and a more ergonomically designed Cab for easier operation, giving you the confidence you deserve to tackle tough jobs with ease, while still being gentle on the environment.

Engine
  • Type: VR3307-CR-TE4 4 Cylinder in line, Common Rail System, Direct Inject
  • Make: Kubota
  • No. of Cylinders / Aspiration: 4 / Turbocharged
  • Engine Net Power: 63.5 HP (47.4 kW)
  • PTO Power: 56 HP (41.7 kW)
  • Total Displacement: 203 cu. in. (3331 cc)
  • Rated Engine RPM: 2400 RPM
  • Fuel Tank Capacity: 23.8 gal. (90 L)
  • Alternator: 60 Amp; Optional: 100 Amp
Transmission
  • No. of Speeds: Fwd: 8; Reverse: 8
  • Main Gear Shift: Fully Synchronized (4 Speed)
  • Shuttle Shift: Hydraulic Shuttle
  • Main Clutch Type: Multiple Wet Disc
  • Brake Type: Mechanical Wet Disc
  • Differential Lock Rear: Mechanical
  • 4WD Clutch Type: Mechanical on-the-go
PTO
  • Type: Live Independent PTO, Electro Hydraulic Clutch with Brake
  • Speed: Standard: 540 RPM; Optional: 540 / 540E RPM
Hydraulics
  • Pump Capacity (3-Point Hitch): 11.0 gal. (41.6 l/min)
  • 3 - Point Hich:Telescopic lower link ends, Telescopic Stabilizers
  • 3 - Point Hich, Category: I / II
  • 3 - Point Hich, Control System: Position, Draft Top (Top Link Sensing) & Mixed Control
  • 3 - Point Hich, Lift Capacity at 24" behind LP: 3307 lb. (1500 kg.)
  • 3 - Point Hich, Cylinder Type: Two External Cylinders
  • 3 - Point Hich, No. Of Standard Remote Valves: 1 (2nd, 3rd, & Flow Control Valve Optional)
Other Features
  • 4WD System: Bevel Gear Type
  • Steering: Hydrostatic Power Steering
  • Tilt Steering: Standard
  • Hood Type / Pedal Type: Full Open, Slanted Steel / Hanging
  • Deck Type (ISO mounted w/Rubber Mat): Full Flat
  • Panel Type: Electronic
  • Fender Shape: Wide, Round
Standard Tire Size
  • Front: 9.5 - 24
  • Rear: 16.9 - 28
Dimensions and Weight
  • Overall Length: 138 in. (3505 mm)
  • Overall Height: 100.6 in. (2555 mm)
  • Overall Width (minimum): 73.0 in. (1860 mm)
  • Wheelbase: 83.1 in. (2110 mm)
  • Crop Clearance (Front axle): 18.1 in. (460 mm)
  • Tread Width Front: 55.9, 59.8 in. (1420, 1520 mm)
  • Tread Width Rear: 55.9 - 71.7 in. (1420 - 1720 mm)
  • Turning Radius (w/o brake): 11.8 ft. (3.6 m)
  • Tractor Weight: 5358 lb. (2430 kg)
Features
  • 3-point Hitch: The Category I/II 3-point hitches provide fast and simple attachment of rear-mounted implements with telescopic lower link ends, standard on all models, which further shows how Kubota is a step above.
  • Fuel Saving Economy Pto: For economy PTO operation, change the lever to 540E position. The engine operates at lower rpm to save fuel and reduce operating noise while still turning the PTO shaft at 540 rpm. Under the economy PTO operation, 540 PTO rpm is available at 1828 engine rpm on the M6060/M7060.
  • Hydraulics: The hydraulics on the M60 Series are state-of-the-art. External hydraulic cylinders improve the lifting power and offer easier maintenance. The front loader cycle times are short, increasing productivity and facilitating operation. One (SCD) hydraulic remote valve is standard, with the option to add up to 2 more, plus an optional flow control valve to control the oil flow volume.
  • Hydraulic Independent Pto: Pulling, lifting, cutting or baling – the hydraulic independent PTO makes your toughest work easier. Self-modulation engagement with an Electric PTO Switch means implements like a rear cutter engage smoothly. The PTO brake engages when the clutch is shut off and securely holds the PTO shaft. The PTO clutch can be hydraulically engaged and disengaged on the go. This means mowing, operating hay equipment or spraying orchards are all made more efficient.
  • Great Maneuverability: The M60 Series also has the time tested Kubota bevel gear front axle, which allows for low maintenance, exceptional turning radius and better ground clearance when compared to traditional u-joint front axles. The bevel-gear front axle provides the M60 Series with greater all-around maneuverability, whether you’re in the tight confines of a barnyard or straddling tall windrows in a hay field. The limited slip differential on the front and differential lock on the rear are standard features, offering increased stability and traction on the challenging ground conditions.
  • Ultra Grand Cab: Stay comfortable year-round in the Ultra Grand Cab – with curved glass and curved upper windshield for more visibility. For even more comfort, the optional Air Ride seat offers exceptional seat suspension to make sure whatever path you’re on is smooth.
  • Operator Comfort: The M60 Series operator’s station provides optimal comfort with a deluxe seat, armrests, wide area rubber floor mat and ergonomic controls built into a console for a more refined finish. The M60 Series also has deluxe features such as a hydraulic shuttle and fully synchronized main shift transmission that allows for clutchless forward and reverse direction changes and easy on the go shifting.
  • Transmission Options: F8/R8 Transmissions – Four speed synchronized main shift and a high/low range supply tractors with 8 Forward and 8 Reverse speeds; F12/R12 Transmissions (Factory Option)* – Six speed synchronized main shift and a high/low range give a total of 12 Forward and 12 Reverse speeds to help find the right speed for different applications. *Available on M7060; Overdrive (F12/R12 models only) – The overdrive function keeps the engine revolutions at around 1960 rpm during high speed driving for better fuel economy
NOTES:
The company reserves the right to change the above specifications without notice.This brochure is for descriptive purpose only. For your safety, KUBOTA strongly recommends the use of a Rollover Protective Structure (ROPS) and seat belt in almost all applications. Not for sale in Nebraska.

Engine

Engine Manufacturer Kubota
Engine Type VR3307-CR-TE4 4 Cylinder in line
Horsepower 63.5 HP (47.4 kW)
PTO HP 56 HP (41.7 kW)
Rated RPM 2400 RPM

Specifications

Wheelbase 83.1 in. (2110 mm)
Height 100.6 in. (2555 mm)
Width 73.0 in. (1860 mm)
Weight 5358 lb. (2430 kg)
Ground Clearance 18.1 in. (460 mm)
Tire Size Front: 9.5-24; Rear: 16.9-28

General

Fuel System Common Rail System, Direct Inject
Fuel Capacity 23.8 gal. (90 L)
Transmission Hydraulic Shuttle
Brakes Mechanical Wet Disc
Hydraulics Pump Capacity: 11.0 gpm (41.6 L/min)
Drive Type 4WD

Shopping Tools